title scale date dr dwg rev the information contained in this document is propr ietary to e-switch and is not to be copied or transferred sheet of rev pcr no description date by kc52a10.001npf w/lockring 4/17/2013 XG0010P b ebp 1 1 a 1 2 contact configuration timing (bbm) non-shorting aa 8.00 [.315 in] 14.20 [.559 in] 2.00 [.079 in] 10.00 [.394 in] 2.00 [.079 in] 15.60 [.614 in] 3.40 [.134 in] n 26.00 [1.024 in] note: 1. all dimensions in mm[inch]. 2. general tolerance: x.x= ` 0.4 x.xx= ` 0.25 3. term. nos. for referance only. 4. contact material: gold flash over silver 5. contact rating: 150milliamp, 250vac/dc 350milliamp, 110vac /dc 6. contact rating (non-switching) 5a 7. operating torque 800 ` 300 g-cm 8. operating temp: -30 ~ c to 85 ~ c 9. ciruit sp: 12 position 30 ~ index (lockring limited to 2 position). 10. dielectric strength: 1000v rms min.@ sea level. 11. hardware supplied on switch: lockwasher, hexnut, stop ring (tab in position 2) 12. denotes critical parameter. 13. 2002/95/ec (rohs) compliant 3/8-32 unef-2a threads n 3.00 [.118 in] a 21105 released for production 4/17/13 ebp 5.50 [.217 in] flat 30 slot 2 locking ring (g200000) kc52a10.001npf (g510346) hex nut and washer not shown in view hardware supplied on switch n 6.35 [.250 in] 9.50 [.374 in] 2 7 . 5 0 [ 1 . 0 8 3 i n ] n 22.20 [.874 in] n 7.70 [.303 in] b 21392 correct base switch part number 3/4/14 ebp b
|
